EDTA Trisodium Gel 24% (Root Canal Chelating Agent)
Pack Sizes Available
Product Description
Technical Specifications
- Active Ingredient: EDTA Trisodium (tripotassium) salt — 24% concentration
- Form: Viscous gel — with irrigation needle for direct canal placement
- Available Pack Sizes: 5ml syringe; 10ml syringe; bottle format for bulk use
- Clinical Functions: Smear layer removal (inorganic component); calcification chelation; canal lubrication during instrumentation
- Use in Protocol: Applied during instrumentation; final irrigant flush sequence before obturation
- Compatibility: Not to be mixed directly with sodium hypochlorite — use alternating flush protocol
Frequently asked questions
EDTA gel (17% or 24% in a viscous carrier) is used during instrumentation as a lubricant and chelating agent applied directly into the canal on the file. The gel consistency keeps the EDTA at the canal wall surface during filing strokes, providing continuous chelation and lubrication. EDTA liquid (typically 17% solution) is used as an irrigant during and after instrumentation, either as an alternating flush with sodium hypochlorite or as the final rinse before drying. The gel is more effective for lubrication during filing; the liquid is more effective for thorough smear layer removal during the final irrigation protocol.
EDTA is available in various concentrations ranging from 15% to 24%. Higher concentration EDTA has a greater chelating capacity per unit volume and achieves effective dentinal demineralisation in a shorter contact time, which is clinically relevant when the file is only in contact with the gel for the duration of each filing stroke. The 24% trisodium EDTA formulation is particularly effective for calcified canals and resistant smear layers. However, extended contact with 24% EDTA can cause excessive dentin demineralisation that weakens root structure, so the final rinse protocol and contact time recommendations should be followed.
No. EDTA and sodium hypochlorite (NaOCl) should not be mixed simultaneously in the canal or in the same irrigant syringe. The combination causes a precipitate (calcium hypochlorite) and inactivates both agents, significantly reducing the antimicrobial effectiveness of the NaOCl and the chelating effectiveness of the EDTA. The correct protocol is to use alternating flushes: NaOCl, followed by flushing with sterile saline or water to remove the NaOCl, then EDTA, then NaOCl again — never directly combining them in the canal.
EDTA gel is placed into the canal access cavity using the included irrigation needle before each file size is used. A small amount (approximately 0.1-0.2ml) is placed in the canal, and the file is worked through the gel as it is advanced to working length. The gel is refreshed between file size changes and flushed out before the final obturation irrigation sequence. It can also be placed on the file tip before insertion to provide immediate lubrication as the file enters the canal in tight or calcified cases.
EDTA gel should not be extruded beyond the apical foramen into the periapical tissues, as it can cause periapical irritation and delayed healing if expressed into the periradicular area. The working length must be accurately confirmed before irrigation with EDTA to ensure the irrigant is being placed within the canal. In cases where the apex is open (open apex due to immature development or resorption), EDTA should be used with particular caution and minimal apical pressure during irrigation.
3 Way Syringe (Dental Air Water Syringe)
Every dental procedure starts with a clean, clear field of view. And more often than not, that depends on one little instrument sitting quietly in the dental unit, doing more work than it gets credit for. The 3-way dental syringe is exactly that kind of workhorse, and ours does not disappoint. Built with a handle crafted from military aircraft-grade aluminum, this dental air water syringe is designed to last through thousands of clinic days without so much as a wobble. The tips are solid alloy, autoclavable, and built for the real world of a busy dental chair. Each unit comes with 2 nozzle tips in the box, ready to go from the moment it arrives. The operation is intuitive. The left button controls water flow. The right button controls air. Press both together and you get a fine, controlled mist. It is a small thing, but dentists who have worked with poorly designed syringes know how much that kind of control matters when you are working on a patient. We know what importers and distributors care about, and it is not just the product specs. After 15 years of exporting medical and dental supplies from India, Sara Wellness has figured out what actually makes a good supplier relationship work: honest pricing, clear communication, and orders that arrive the way they were promised. No surprises. No runaround. Just your products, packed well, shipped on schedule, delivered right. We work one-on-one with every buyer. Whether you are a dental supply distributor placing your first trial order or a regional wholesaler looking to lock in a regular supply chain, we meet you where you are. Minimum order quantities are flexible, because we understand that different markets move at different speeds. The syringe itself is compatible with standard dental units, so your clinic customers do not need to fiddle with adapters. Sterilization is done using standard high-temperature, high-pressure autoclave cycles, meaning the infection control protocol your clients already follow applies directly. The ergonomic design fits comfortably in hand, which matters more than people admit during a six-hour clinic day. Available in individual units, clinic packs, and larger wholesale cartons, this product is well-suited to distributors supplying dental chains, individual practitioners, and government hospital procurement alike. Custom packaging options and OEM labeling are available for buyers who want their own brand on the box. India has quietly become one of the most reliable sourcing destinations for dental supplies globally, and Sara Wellness has been part of that story for a decade and a half. Competitive pricing backed by genuine quality, not the other way around. If you are sourcing dental 3-way air water syringes for your next import cycle and want a supplier who picks up the phone, answers the email, and gets the shipment right the first time, let us talk.
3-Fold Dental Chair Package
Starting a dental clinic from scratch involves a purchasing list that never seems to end. The chair. The compressor. The autoclave. The scaler. The suction unit. The UV cabinet. Each line item means another vendor, another negotiation, another delivery to coordinate. For distributors supplying new clinics across their markets, that process multiplied by ten operatories can become a project in itself. That is exactly the problem this package solves. The 3-Fold Dental Chair Package brings together everything a functional dental operatory needs, consolidated into a single sourcing decision. At the center is the electrically operated three-fold patient chair, designed around the kind of ergonomics that actually matters when a dentist is on their feet treating patients for eight hours straight. The three-fold mechanism allows the chair to transition between sitting and supine positions with precision, making it practical for everything from consultations to complex procedures. Multiple memory positions mean the chair can be set and recalled for different treatment protocols without manual adjustment each time. Beyond the chair itself, the package includes an RVG unit, X-ray unit, single-head compressor, ultrasonic scaler, motorized suction, a front-loading autoclave, a 12-tray UV sterilization cabinet, a light cure unit, a micromotor, an air rotor handpiece, and a glass bead sterilizer. In short, the package covers diagnostics, treatment delivery, and sterilization in a single order. New clinic, fully equipped. That is a compelling proposition for any distributor working with dental chain rollouts, government health programs, or independent practitioners opening their first practice. Now for the part that matters most to importers. Sara Wellness has been supplying medical and dental equipment from India for 15 years. We understand what procurement teams actually need from a supplier: accurate specifications, documentation that clears customs without complications, packaging that survives freight, and a supplier who communicates clearly and consistently throughout. These are not small things when you are coordinating shipments across multiple markets. We work directly with every buyer. No middlemen, no account managers who don't know the product. You deal with someone who can actually answer your questions, confirm lead times honestly, and flag potential issues before they become problems. MOQs are negotiable because we know that distributors running pilot orders for new markets operate differently from established wholesalers placing quarterly replenishments. We accommodate both. Package configurations are customizable. If you need the chair and core accessories without specific items already covered by your local supply chain, we can build the package accordingly. OEM and private-label options are available for importers who want to go to market under their own brand. Each unit ships in a reinforced crate built for international freight, with full documentation support including CE compliance paperwork, packing lists, and commercial invoices formatted for smooth customs clearance. If you are sourcing complete dental clinic packages for your distribution network and want one supplier who handles the whole thing without the back-and-forth, that is where we come in.
Clinpro Dental Pit & Fissure Sealant
Clinpro Dental Pit & Fissure Sealant with Color-Change Technology | Prevention That Shows Itself. How many times has a clinician placed a clear sealant and then spent the next minute squinting under the overhead light trying to confirm whether every single groove actually got covered? That lost minute adds up across a day of back-to-back appointments. And the uncertainty is genuinely annoying. Color-change technology fixed that problem years ago, and it is still one of those small innovations that makes a noticeable difference in how smoothly a clinic runs. This dental pit and fissure sealant applies pink. The color is bright enough that you can see exactly where it goes, right as it goes there. Then, under curing light, it changes to a natural white that matches the tooth surface. No guesswork. No reapplication. Just straightforward visual confirmation that the job is done correctly the first time. The formulation is a light-cure, resin-based sealant designed to flow easily into even the tightest pits and fissures. Low viscosity matters here because the whole point of a sealant is to get into the grooves that a toothbrush cannot reach. Once cured, it bonds securely to enamel and releases fluoride over time. The fluoride component is rechargeable through the use of fluoride-containing oral care products, which means long-term protection that keeps working well beyond the initial application. Because it is a low-fill resin, the sealant requires minimal occlusal adjustment once it cures. Dental hygienists appreciate that. So do pediatric dentists who work with young patients who are not thrilled about long chair time to begin with. Available in 5 mL dropper bottles, this format works well for clinics that prefer the flexibility of bottle dispensing over pre-filled syringes. Applicator tips are sold separately or can be bundled with the bottle in kit configurations. For distributors supplying multiple clinics or dental chains, bulk case packs of bottles and syringe kits are available. Here is where the conversation shifts from product specs to supplier reality. Sara Wellness has been exporting dental materials and medical supplies from India for 15 years. We are not a marketplace listing. We are a direct exporter with our own sourcing, quality control, and export logistics infrastructure. That means when you place an order, you are dealing with the people who actually pack it, document it, and ship it. MOQs are flexible because we know that a first-time importer testing a new product line is in a very different position from an established wholesaler managing quarterly replenishments. We work with both. Pricing is competitive and honest because our supply chain is tight and we do not inflate margins unnecessarily. For buyers interested in private-label or OEM options, we can accommodate custom packaging and branding. Your label, your product identity, the same formulation and quality underneath. Each shipment comes with complete export documentation: commercial invoices, packing lists, certificates of origin, and any additional paperwork your customs team needs to clear the shipment without delays. That is not an extra service. That is just how we operate. If you distribute dental preventive materials to clinics, hospitals, or dental school programs and need a reliable source for pit and fissure sealants with color-change technology, Sara Wellness is ready to talk specifics.