Citroseptic Can 5 Litre (Fresenius)
Pack Sizes Available
Product Description
Technical Specifications
- Product Type: Dialysis machine disinfectant and descaler
- Active Component: Citric acid-based formulation
- Primary Use: Disinfection and descaling of haemodialysis machine hydraulic pathways
- Pack Size: 5 Litre can; 1 Litre bottle
- Compatibility: Fresenius dialysis machines (confirm compatibility for other brands)
- Usage: Via machine-programmed disinfection cycle; mandatory thorough rinse before patient use
Frequently asked questions
Citroseptic is a disinfectant and descaler used in the maintenance of haemodialysis machines. It is used to disinfect the hydraulic pathways of the dialysis machine (the internal fluid circuits that contact the dialysate solution) and to remove mineral scale deposits (primarily calcium carbonate) that accumulate over time. Regular use as part of a prescribed maintenance programme helps maintain machine performance and patient safety.
Citroseptic is based on citric acid as the primary active component. Citric acid is an organic acid that provides dual action — antimicrobial disinfection of the machine's internal surfaces and descaling through dissolution of calcium carbonate and other mineral scale deposits. The citric acid formulation is chosen for its effectiveness and relative material compatibility with dialysis machine components.
Citroseptic is used as part of the programmed disinfection and rinsing cycle of compatible dialysis machines, following the machine manufacturer's protocol. The product is introduced into the machine's chemical disinfection port or inlet at the specified concentration and the disinfection programme is initiated. After completion, thorough rinsing is mandatory to remove all traces of the disinfectant before the next patient session. Follow the Fresenius machine-specific protocol precisely.
Citroseptic is primarily specified for Fresenius dialysis machines and is part of the Fresenius recommended maintenance programme. It may be compatible with other dialysis machine brands that permit citric acid-based disinfectants, but compatibility must be confirmed with the machine manufacturer before use. Using a disinfectant not specified by the machine manufacturer may void warranty and create liability issues.
Disinfection frequency depends on machine usage, local regulatory requirements, and the machine manufacturer's recommendations. For Fresenius machines, the disinfection protocol specifies the frequency and concentration appropriate to the machine model and usage pattern. Generally, disinfection is performed at the end of each operational day or after a specified number of patient sessions, as prescribed in the maintenance protocol.
Related Products
Explore more high-quality items from our Sterilization, Antiseptic and DIS range.
Avagard Antiseptic Hand Sanitizer
Ask any infection control nurse which product they will never run out of, and somewhere near the top of that list will be a reliable antiseptic hand rub. Hospitals go through it by the case. Clinics order it before they need it. And distributors who supply healthcare facilities know that a stockout of hand hygiene products is the kind of thing that gets remembered for all the wrong reasons. This is exactly the kind of product where sourcing reliability matters as much as the product itself. The Avagard Antiseptic Solution for Hand Hygiene is a broad-spectrum, alcohol-based waterless hand rub formulated with 2-Propanol IP 45% w/w and 1-Propanol 30% w/w. It works across a wide spectrum of microorganisms, covering bactericidal and fungicidal activity. The pump dispenser delivers a measured dose with each press, which means consistent use across busy clinical environments without waste or guesswork. The formula does not skip the skin: emollients are part of the mix, making repeated daily use considerably easier on healthcare workers' hands than plain alcohol alternatives. The 500 mL pump bottle format is purpose-built for hospital and clinic settings, fitting standard tabletop and countertop dispensing positions. Refill bottles are available for wall-mounted dispensers, and bulk case packs make restocking straightforward for high-consumption facilities. Now, a quick word for the people reading this who are not the ones actually using the product. Sara Wellness has been exporting medical and infection control products from India for 15 years. In that time, we have figured out that distributors supplying hospitals are not just buying a hand sanitizer. They are buying a guaranteed supply chain. They need the product to arrive correctly labeled, correctly packed, and on time, every time, without needing to chase an email to find out where the shipment is. That is the part we take seriously. We work directly with every importer, one account manager, one consistent point of contact from the first inquiry to the delivery confirmation. MOQs are flexible enough to accommodate a distributor testing a new market or a wholesaler managing large quarterly orders. Pricing is honest and competitive because we source efficiently and we do not pad margins unnecessarily. For buyers interested in going beyond standard packaging, private-label and OEM options are available. Your brand, your label, the same formulation and quality underneath. Each shipment comes with complete export documentation, commercial invoices, and the paperwork your customs team will not have to fight with. That last bit, frankly, is more valuable than most buyers realize until they have dealt with a supplier who does not manage it well. If you distribute to hospitals, surgical centers, clinics, or institutional facilities and need a reliable source for broad-spectrum antiseptic hand hygiene solutions, Sara Wellness is ready to talk specifics.
Autoclave 15 Litre (Vertical Table-Top Steam Sterilizer)
Picture the dental clinic at 9am with a waiting room that is already full. The autoclave from the previous evening's sterilisation run has finished its cycle. The instruments are dry, bagged, and ready. The first patient goes straight into the chair without the nurse running to fetch anything. That ten-minute buffer between autoclave-ready and chair-ready exists because the steriliser did its job on schedule, at the right temperature, without drama. The 15-litre vertical table-top autoclave is exactly the right size for that clinical environment — dental clinics, small surgical units, GP practices, ophthalmic clinics, dermatology suites, and pathology laboratories. Not so large that it dominates a back room and takes forever to heat up, not so small that the instruments don't fit. Fifteen litres is the sweet spot for the settings that need steam sterilisation multiple times a day without the operational overhead of a large horizontal hospital autoclave. This is a vertical (top-loading) steam steriliser with a stainless steel interior chamber, a digital temperature controller and timer, and an automatic pressure control switch that cuts electrical input when the set working pressure is reached inside the chamber. The temperature range covers both the 121°C gravity displacement cycle (used for unwrapped, solid items and liquids) and the 134°C cycle (used for faster sterilisation of surgical instruments in many clinical settings). A water level indicator and a pressure gauge are fitted as standard. The silicone rubber gasket provides a reliable pressure seal at the lid, and the radial lock or wing-nut lid mechanism ensures safe operation. Safety features are multiple: automatic pressure release, overpressure safety valve, low water level cutoff to protect the heating element, and a locking lid that prevents opening under pressure. The stainless steel SS304 construction on inner chamber surfaces (and SS304/316 on deluxe models throughout) provides corrosion resistance and longevity appropriate for the demands of daily clinical use. For medical equipment distributors supplying dental networks, nursing home chains, diagnostic centre groups, and government health programmes — the 15-litre table-top autoclave is a procurement item that appears on virtually every new facility equipment list. Sara Wellness exports vertical autoclaves and other medical equipment to international wholesale buyers. One-on-one dealing, flexible MOQs, and fifteen years of export experience ensure the shipment arrives configured and documented correctly for the destination market.
Bellcross Disposable Safety Goggles (Transparent — Medical and Lab Use)
The eye occupies approximately 0.1% of the body surface area, yet occupational eye injuries account for roughly 10–15% of all workplace injuries. In a clinical setting, the risk is specific and well-documented: blood splash to the conjunctiva. A single blood splash exposure from an HIV-positive patient carries an estimated transmission risk of approximately 0.1% — lower than needlestick, but not zero, and entirely preventable with properly worn protective eyewear. Bellcross Disposable Safety Goggles are transparent, zero-power medical and laboratory protective eyewear designed for clinical environments. The clear polycarbonate lens provides unobstructed visibility — which matters when you are trying to see what you are doing with a needle or a scalpel — while the wrap-around frame eliminates the lateral, inferior, and superior gaps through which fluid can reach the eye when wearing standard safety glasses. Goggles, as opposed to safety glasses, are the appropriate specification when liquid splash from any direction is the primary risk. In hospital settings these goggles belong in HIV safety kits, trauma resuscitation rooms, blood collection stations where splash is possible, laboratory areas handling blood specimens, endoscopy units (scoping procedures generate fluid), oral surgery, and any procedural area where aerosol-generating procedures occur alongside bodily fluid management. The disposable format eliminates two problems that reusable goggles present: the decontamination compliance problem (reusable goggles that are not properly decontaminated between users carry the exact exposure risk they were meant to prevent), and the anti-fog maintenance problem (goggle anti-fog coatings degrade with cleaning and sterilisation cycles). Single-use goggles start fresh every time. Bellcross Industries manufactures safety goggles as part of its complete clinical PPE range from its Mumbai facility, established 1984. Forty years of disposable medical product manufacturing experience behind every pair. Sara Wellness exports Bellcross safety goggles to international wholesale buyers. Box quantities for clinical supply and full carton quantities for institutional or distribution purchasing.